6 Apr 2011

Clogged Print Head


Clogged print head or print head dries term or clogged. Before you go any further we should be extra careful with the print head. It would be wise if we frequently check the condition of the print head periodically for problems like this. If the problem head like this now appears better start getting ready we anticipated before it gets worse over time.
Printer head may dry out and clog if a time in a long period of time the printer is never or rarely be used. This caused the ink to dry and clog the holes on the printer head. For this problem we can try various ways to address this issue with.
Several types of new models of printers equipped with facilities Cleaning system. Try doing this with an innate facility that is by doing a printer test repeatedly. Or there is also equipped with facilities to clean the head (cleening head). This facility can be used to clean the head. This method is only useful if the blockage in the head not too severe. Usually for a stuffy head padah this way are rarely successful. And if the head cleaning process using the facility you repeatedly do perhaps 15 to 20 times then it will lead to wasteful ink. Or could even lead to "Waste ink tank full" so it needs to be reset.
Other way is to just replace Cartidge. This can be done if Cartidge and head together. This method is quick and easy, but the cost is quite expensive. And this last one of the ways that we can try. We try to clean its own printer head. That is by soaking or enter the printer head into the liquid water / alcohol or ammoniac may be added into it (remember that fed into the liquid is only part of his head, not all of them). Or if you need to buy a special liquid to clean the printer head to dry it (cartridge flush solution), but also the price is pretty fluid. Please do this step about 10 minutes or all day if necessary, also no problem. This move could dilute the ink is dry again. With the melting of the dry ink is expected to return to normal

No comments:

Post a Comment

Please comment, but still keep the decency to not do spam comments